top of page
EQUIPRO SAVIOUR
EMERGENCY FIRE SUPPRESSION TOOL

Last ditch, emergency situation manual activated fire suppression device. Simply activated by pulling a pin and then thrown into the fire - effective for a volume of up to 150m3

Applications include boat engine spaces, first responder to vehicle or room fires, remote locations, military, navy and industrial applications.

The Equipro Saviour is used when faced with a last resort emergency situation fire. For example on a boat, far from land to extinguish an engine bay fire or arriving at a scene of a burning vehicle or an engulfed room.

Activate the Equipro Saviour by pulling the activation quick release pin and then throwing into the fire. After a few seconds the Saviour will activate and discharge an extremely fine aerosol into the air around the fire quickly beating down flames and suppressing the fire. Very useful fire safety device for extreme and critical situations considered as a safety final stop or back up to any installed fire safety measures already in place.

SAVIOURTRANS.png

The Equipro Saviour is a non-pressurized, aerosol fire suppression tool designed to fight developing/developed fires in confined spaces. They are used by firefighters, police, military, first responders and public as a highly effective fire suppression tool.

This small portable unit contains chemical components based on Potassium Nitrate, which allows the suppression of ABC and K class fires, the components are non-toxic and replace Halon Gas.

The EQUIPRO is not pressurized and is manually activated by pulling a pin that will activate an electronic ignition system. After activating the EQUIPRO SAVIOUR, an aerosol mist is generated which expands volumetrically, flooding the space and suppressing the flames in seconds. Its application means reduction of water use for fire extinguishing

EQUIPRO SAVIOUR-FST is designed for use in class A, B, C, and F (K) fires.

EQUIPRO SAVIOUR-FST is capable of preventing a flash-over and a back-draft. It will provide double protection for firefighters as it will lower the temperature below the autoignition temperature of the fire gases. The second safety feature is the aerosol, once it is active in the atmosphere, the fire gases become inert and cannot ignite.

The advantage of this product is that the user is always out of the first line of fire avoiding the negative effects of direct physical exposure to a fire. The product comes with two locks or Pin. When the double protection is removed, it activates after 8 seconds. Red LED Light Indicator when activated. Equipro Saviour does not remove oxygen so we gain time to evacuate those affected.

COMPOSITION 

75% Potassium Nitrate (KNO3), CAS #: 7757-79-1

2% Magnesium (Mg), CAS No.: 7439-95-4

23% Epoxy Resin Polymer (Bisphenol A diglycidyl ether resin), CAS #: 25068-38-6

SPECIFICATIONS:

Total gross weight: 5.10 Kg.

Content weight: 2.90 Kg.

Coverage Volume (Up to): 150m3.

Discharge time: 33 seconds.

Activation method: Pulling the security PIN manually.

Operates to : -55ºC below zero.

CHARACTERISTICS:

CALL ZERO OR SPARK EMISSIONS

NO USE OF OXYGEN

ELECTRONIC IGNITION, WITHOUT PYROTECHNIC IGNITER

 

SHELF LIFE OF 15 YEARS

ACTIVATION LED

EXCHANGE BATTERY (EVERY 5 YEARS)

EPA CERTIFIED SNAP (AEROSOL TO SFE)

NOT TOXIC

NON-CORROSIVE

NON-CONDUCTIVE

 

saviour11trans.png
EQUIPRO Rebrand Logo white.png

+44 (0) 333 011 5969

office@equiprofire.com

Equipro Ltd,

Barttelot Court,

Barttelot Road,

Horsham, West Sussex,

RH12 1DQ

  • Facebook
  • Twitter
  • YouTube
  • LinkedIn

© 2025. Equipro Ltd.   I  Privacy Policy  I  Careers

bottom of page